Product Description

The Juggernaut (Exclusively at GoPowerSports) is everything the original 30 series drivers lacks under load. No longer do you have to sacrifice your engines power or rpm capabilities! With this new Super 30 Series Driver, you can take full advantage of a high HP high RPM small block engine (196/212/225). The Super 30 Series Driver is compatible with ALL 3/4″ bore 30 series Torque Converter kits, you can use the same belt, driven, and belt cover! This driver is recommended to be used with higher RPM engines, Stage 2 or higher. On a stock motor running at 3600 RPM you will NOT see any difference in performance and it may effect top end MPH. Running 4000+ RPM is where the Juggernaut shines.
– No more slipping under load.
– Has been tested up to 8500 RPM
Features and Specs:
Bore: 3/4″ (.750″)
Key-way: 3/16″, NOT INCLUDED, use part #1031
3/4″ wide asymmetrical belt
Engagement: 2,500 RPM
RPM Capabilities: 8,500+ RPM
All new design with 3 rollers and 6 springs
No adjustments needed
Limits/Eliminates belt slippage
Improved Reliability and Performance on high HP small block engines up to 15hp, the HP rating may vary due to the application.
Compatible with all 30 series TAV kits with 3/4″ bore (comet and aftermarket)
Slightly larger diameter then a regular 30 series driver but still works with the same covers and belt
It is highly recommended to use an impact gun to install this and all drivers. Hand tight is not tight enough.