This CAN cable has a 7-pin 712 (screw-in) connector on one end and a 5-pin 712 connector on the other to connect certain SmartyCam cameras to the CAN port on an data logger. You can also modify the cable for use as a power cable, to connect a stand-alone camera to vehicle power.
Sold individually.
Typical uses:
Original SmartyCam (2009-13, with the viewing screen on top) Exp port to dash/logger or Bridge
SmartyCam HD “Rev 2” or later (2015+) Exp port to dash/logger or Bridge
SmartyCam HD GP “Rev 2.1” or earlier (to 2018) Exp port to dash/logger or Bridge
Not compatible:
SmartyCam HD (version 1)