CL-3 Low Duration for Clone 6.5HP or GX200

CL-3 Low Duration for Clone 6.5HP or GX200

SPREAD THE LOVE

Description

The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak horsepower. The DynoCams CL3 is legal for the current profile rules for stock classes. The lobes are hardened for extra durability, extending the life of this cam.
Product Specs:
Engine: 196cc OHV Clone
Recommended Class: Unrestricted Stock Classes
Target (MAX) RPM: 6400-6900
Spring Pressure (In / Ex): 10.8 lbs
Valve Lash (In/Ex): .003″
Ignition Timing: 32 Deg BTD
SAFETY NOTICE:
Use this racing camshaft with stock valve springs ONLY and the “weiner” type exhaust header with an max. inside diameter of .635 for safety reasons. If after market racing springs and/ or unrestricted exhaust system is installed a BILLET FLYWHEEL IS MANDATORY!
Grind Number : New CL-3
Recommended Class: Stock
Valve TimingIntakeExhaustOpen29.15 BTDC65.95 BBDCClose 75.58 ABDC41.55 ATDCLift.2245.231C/L114.0 ATDC103.5 BTDCValve Lash.003.003Check lash when engine is coldOther Specs
Recommended Ignition Timing: 31-32 Degrees

Contact Us