Product Specs:
This rod and cable coupler is a trick way to fasten a cable (3/64″, 1/16″, or 5/64″) to a control rod. Its hex head has a 1/4-28 through threaded hole to fit our throttle rod, and on a paralled axis, a 2mm drilled hole for the cable end. Secure the cable with a 3/8-24 jam nut and a 3/8″ flat washer, and there’s no need to bend or loop the cable where it’s attached to the rod.
OD: 5/8″
ID: 1/4-28
Length: 1″
Max. Cable Diameter: 3/32″