Aluminum Crankcase (Sidecover) for 6.5HP Clone / GX200 / Predator Hemi Engine

Sidecover for the GX200 / Clone and Predator Hemi Engine has arrived. It has the attention to detail and good looks that have come to be expected of ARC’s products.
It features side by side dual ball bearings that support the crank and gives it another fulcrum point to help eliminate any crankshaft flexing.
It has an integral o-ring along the perimeter in it’s machined groove that guarantees a good seal.
4 solid pin receptacles mate with solid dowels to increase mating shear strength.
Bronze bushing(with ARC’s advanced oil system) support for camshaft main increases strength and minimizes potential for wear.
It has 2 venting holes at the top with 1/8″ NPT Plugs.
It also has 2 oil fill ports with ARC aluminum hand tighten plugs.
Another useful feature is the threaded holes over the side dowel -pins so that small bolts (included) can be used to push the side cover for easy removal.
Includes:
Bearings
Seal
Gasket
O-Ring
Plugs and caps
Installation hardware.
Important:
Due to variations in clone blocks, you may find that the side cover is not quite lining up with all four dowel pins. Try removing the bottom dowel pin if you encounter difficulty. Will Not fit old style Harbor Freight Greyhound or Non Hemi engine. Will Not work with Stud Kit.