This SFI Certified flywheel model for the Honda GX160 and GX200 and the BSP “clone” engines. The keyway is fixed in the stock position and the stock pull starter can be used.
Product Specs:
The flywheel to which all others are measured.
SFI certified aluminum flywheel for Honda GX160, GX200, & 196cc Clone.
The keyway is fixed and the stock pull starter can be used.
Weighs 3.4lbs and incorporates a special low drag fan design unique to ARC flywheels.
A specially designed high-power rare earth(neodymium) magnet and carrier design creates the hottest spark possible.
Now featuring 8 degrees timing advance built into the keyway. 32 degrees BTDC.
Set coil gap to .030″
Flywheels made for the GX200 and 196cc Clones, NOT for Predator Engine (Shaft taper is not same).