DIYMINIBIKES

This sprocket was manufactured with two flaws, but is still will work on many go-karts or mini-bikes.
Defects:
Teeth were cut short (see alternate picture), the pitch (#40) is correct and will work with #40 chain.
Bolt holes are drilled with very little tolerance (may need reamed out to work with your hub)
No returns available for this product!
Product Specs:
Chain Pitch: #40 (only)
Teeth: 60
Bolt Circle: 2-13/16″
Bolt Holes: 5/16″ (4)
1-5/8″ Center ID
9-5/8″ OD