Product Description
Watch out Tokyo…the is here!
This is the monster you need to harness big HP with the 30 series torque converters on well built small block engines up to 15HP (196/212/223/236CC’s)
will all but eliminate belt slippage at higher rpms when under a load and has been tested up to 8500 RPMs! This will replace your stock driver and use the same belt, driven unit, and belt cover.
is not recommended for governed or stock engines. You will not see a difference in performance and may actually slow you down. Due to its design, this is for modified engines and keeps the power locked in above 4000 RPMs allowing you to take advantage of the additional power from high revving engines.
Features and Specs:
Bore: 3/4″ (.750″)
Key-way: 3/16″, NOT INCLUDED, use part #418397
Uses Standard 3/4″ top width belt Part # 203589A
Engagement: 2,500 RPM
New design with 3 rollers and 6 springs
No adjustments needed
Compatible with all 30 series TAV kits with 3/4″ bore (and aftermarket)
Although larger in diameter, it still works with the same belt and belt guard
Please note the power rating of this unit is dependent upon many factrs, including vehicle weight and gearing.