DIYMINIBIKES

Deluxe Hardware Kit
Kit Includes:
(1) – Seat mount kit
(1) – Motor mount bolt kit
(12) – -28 Easy start tapered wheel studs
(4) – -28 Hardened steel hex wheel nuts
(6) – -28 Smooth wheel nuts
(2) – of each wheel spacers 1/8″ & ” (8 pcs. Total)
(1) – Aluminum spindle nut set
(1) – Aluminum throttle clevis
(3) – Aluminum spacers for pitman arm bolt
(1) – Throttle cable
(1) – Compression fitting
(1) – 3/8 Hex cable pull adapter
(1) – Throttle spring
(1) – ” dia. Throttle rod locking collar
(1) – -28 thin steel jam nut for throttle assembly
(1) – Throttle linkage kit
(20) – Small safety clips
(5) – Large safety clips
(2) – Aluminum body brackets with springs installed
(2) – Axle snap rings
(2) – King pin bolts (1/2 x 3.75 Long)
(2) – Rear bumper bolts w/ nuts
(1) – -28 x BHCS for axle bearing
(1) – 5/16-24 x Set screw for PM-15ULS
(3) – 10-32 x 5/8 BHCS
(3) – 10-32 Nylock nuts
(6) – -20 x 1 HHB
(6) – -20 Nylock nuts
(6) – 5/16-18 Nylock nuts
(10) – 5/6-18 Nuts
(4) – 3/8-16 thin jam nuts
(4) – -20 Right hand thin jam nuts
(6) – -20 Thin slotted jam nuts
(12) – 7/8″ OD x ” ID x 1/16″ thick spindle washers
(2) – 7/8″ OD x ” ID x 1/4″ thick spindle washers
(6) – 7/8″ OD x ” ID x 1/32″ thick spindle washers
(3) – #10 Flat washers
(3) – #10 Fender washers
(10) – #12 Flat washers
(15) – 5/16 Flat washers
(4) – 5/16 Fender washers
(6) – 3/8 Flat washers
(4) – Nerf bar pins 1/4″ dia.
(3) – Seat weight mounting elevator bolts
(6) – 5/16 Dzus buttons
(4) – 7/17 Dzus buttons (Large 1 inch head)
(2) – 3/8-16 x 1 head drilled HHB
(2) – 3/8-16 x 1 HHB
(2) – 3/8-16 x 1 drilled HHB
(2) – 3/8-16 x 4 drilled HHB
(1) – 3/8-16 x 2 drilled HHB
(2) – 5/16-18 x 2 drilled HHB
(1) – -20 x 1 drilled SCHS
(1) – Plastic case