1″ Deluxe Flexpruf Solid Steel Axle Std End 42″

1″ Deluxe Flexpruf Solid Steel Axle is made out of extremely tough steel.
The ends step down from 1″ to 3/4″ and have a 3/4 – 16 thread.
Standard end is 2″, thread length is 1-3/8″.
Two keyways (1/4″) are offset 180 degrees for stress relief, balance and unrestricted positioning of brakes, bearings and hubs.
Ends are drilled for your cotter pins or safety wire.
Brightly plated and poly-wrapped for protection.
Axle diameter is 1″, overall length 42″, shoulder to shoulder is 38″.