DIYMINIBIKES

Weldments
In response to OEMs who require custom-designed, welded assemblies, we provide the following weldable steel components of Azusa-design assemblies.
Description Part No.
Hub for Steel Disc, 1″ ID x 1-7/8″ OD x 1/2″ wide, two 5/16-18 set screw holes, and 1/4″ keyway 8236
Hub for Steel Disc, 1-1/4″ ID x 1-7/8″ OD x 1/2″ wide, two 5/16-18 set screw holes, and 1/4″ keyway 8636
Hub, 3/4″ Bore, Stepped, 3/4″ ID x 1-1/2″ OD x 2-3/4″ long, 1/4″ x 1-5/16″ OD Shoulder, 3/16″ keyway & 5/16-18 Set Screw Hole opposite 8234
Hub, 1″ Bore, Stepped, 1″ ID x 1-1/2″ OD x 2.75″ long, with 1/4″ x 1-5/16″ OD shoulder. 1/4″ keyway with set screw hole opposite 8237
Hub, 1″ Bore, 1″ ID x 1-1/2″ OD x 1-1/2″ long. 5/16-18 set screw with 1/4″ keyway 8239
Hub (Weldable Steel Sleeve), 1″ Bore, 1″ ID x 1-3/8″ OD x 2-1/2″ long with 1/4″ keyway 8299
Tube, Tapered Bearing Hub, 2″ OD x 1.782″ ID x 3-5/8″ long 8238
Tube, Bearing Hub, 1-5/8″ OD x 1-3/8″ ID x 3-1/2″ long 8230
Bearing Hanger, 3/4″ Axle, 3-13/16″ Square x 1/4″ thick, 5/16″ holes for 2 & 3 hole flangettes 8126
Bearing Hanger, 1″ Axle, 3-1/2″ Square x 1/4″ thick, 5/16″ holes for 2 & 3 hole flangettes 8127
Bearing Hanger, 1-1/4″ Axle, 4″ x 4-1/4″ x 1/4″ thick. 5/16″ holes for 2 & 3 hole flangettes 8130
Bearing Hanger, Jackshaft, 1-3/8″ ID x 3″ OD with 2″ mounting edge x 1/4″ thick 8128
Spindle Arm (Side 1), 3-3/4″ x 1″ with support wedge x 1/8″ thick with 5/16″ bolt hole 8172
Spindle Arm (Side 2), 3-3/4″ x 1″ with support wedge (opposite from side one) x 1/8″ thick with 5/16″ bolt hole 8173
Spindle Bracket, 5/8″ Kingpin, 2-1/2″ between ears, 1-1/4″ clearance to bolt centerline. 1/4″ thick x 1-3/16″ wide. For 5/8″ Kingpin. 8171
Spindle Bracket, 1/2″ Kingpin, 2-1/2″ between ears, 1-1/4″ clearance to bolt centerline. 1/4″ thick x 1-3/16″ wide. For 1/2″ Kingpin. 8181
Spindle Axles, Unplated: 5/8-18 x 3.75″ 8445
Spindle Axles, Unplated: 5/8-18 x 4.50″ 8457
Spindle Axles, Unplated: 5/8-18 x 6.00″ 8472
Spindle Axles, Unplated: 3/4-16 x 3.75″ 8444
Spindle Axles, Unplated: 3/4-16 x 4.50″ 8458
Spindle Axles, Unplated: 3/4-16 x 6.00″ 8471
Pitman Arms, 5/8″ shaft hole, 5/16″ bolt hole, 5 ga. (.210″), 1-5/8″ center to center with 3/16″ offset 8129
Rod Anchor, 1-3/8″ x 3/4″ x .160″ thick with 1/4″ hole. 8182
Rod Anchor, 1-3/8″ x 3/4″ x .375″ thick with 1/4″ hole. 8176
Steel Disc, 4-7/8″ OD, 1-5/16″ bore, 4 holes on 4″ bolt circle, 1/4″ thick 8178
Steel Disc, 5″ OD, 1-1/2″ bore, 4 holes on 4″ bolt circle, .165″ thick 8195
Steel Mounting Bracket, 5-1/2″ x 1″ x 1/8″ Thick, Three 3/8″ holes. 1.75″ on center 8198
Engine Mounting Plate, 5″ x 12″, Flat (Dimensions) 8190
Engine Mounting Plate, 5″ x 12″, Flat, Heavy (Dimensions) 8199
Engine Mounting Plate, 8-3/4″ x 7-3/4″, with Lips (Dimensions) 8191
Engine Swing Mount Plate (Dimensions) 8155