Product Specs:
The new 6696 flywheel from ARC Racing has an ultra low drag fin design that will greatly reduce air drag on your racing engine, while still moving enough air for cooling.
Less air drag on the flywheel means more power freed up throughout the power curve, especially on the top end.
This flywheel is designed for oval track or drag racing.
Will work with stock pull rope and OEM coil.
The 6696 will fit HEMI predator engine (generation 2). It will not fit the generations 1 & 3 predator
Features:
This flywheel will have the same basic set up as the 6626. This flywheel also has a minimum coil gap of .030 as all our other flywheels do, meaning DO NOT set the gap closer than .030. However you can use .050 to .075 in most cases.
The magnets in our flywheels are very strong and opening up the coil gap will help reduce magnet drag as the magnet moves underneath the coil. This is yet another advantage to our flywheels that will help free up more power in these engines.
This new 6696 flywheel has more power making potential than any other approved flywheel on the market.
Our test as well as testing from other reputable companies shows it will make around the same power with zero tape on the blower housing as the 6626 does with the blower housing fully taped up.
Timing is 32 degrees BTDC with stock key.
Flywheel weight 3.4lbs.
Minimum coil gap .030.
Torque to 65 ft/lbs